CarTFT.com
- Assemblation of system (Hardware + Software) -
MiniPC HAHE-MC-B Enclosure (for Intel D945GSEJT Half-Height ITX) [Black]
PRODUCT IS CURRENTLY NOT AVAILABLE !![MiniPC HAHE-MC-B Enclosure (for Intel D945GSEJT Half-Height ITX) [Black]](http://truckatlas.de/image_db/HAHE-MC-B_V2.jpg)
Simple, but efficient : With this enclosure you take full advantage of the small form factor of the Intel D945GSEJT Half-Height Johnstown mainboard. And with its dimensions of only 199x180x39mm it has, with an internal volume of less than 1.4 liters, room for one 2.5" harddrive or SSD drive. The enclosure can be operated fully fanless with the Intel D945GSEJT even under full load in continous operation.
Optionally available accessoiry :
- Stand
- VESA screws for installation on TFT/LCD/Plasma/... with VESA-100 drilling.
On the enclosure rear side there is a small, still closed, hole where you can eg. install a WLAN
[more]
Simple, but efficient : With this enclosure you take full advantage of the small form factor of the Intel D945GSEJT Half-Height Johnstown mainboard. And with its dimensions of only 199x180x39mm it has, with an internal volume of less than 1.4 liters, room for one 2.5" harddrive or SSD drive. The enclosure can be operated fully fanless with the Intel D945GSEJT even under full load in continous operation.
Optionally available accessoiry :
- Stand
- VESA screws for installation on TFT/LCD/Plasma/... with VESA-100 drilling.
On the enclosure rear side there is a small, still closed, hole where you can eg. install a WLAN antenna.
Technical data :
Drives : 1x 2.5"
Front-connectors : 2x USB 2.0, 1x earphone, 1x microphone
Front-buttons : Power, Reset
Front-LED : Power, HDD
Dimensions : 199 x 180 x 39 mm
Additional pictures :
Please login for creating product ratings.
from mail@veeser-fn.de am 16.04.2010
| 
| See all my comments
from xmaestsre am 22.03.2010
|
| See all my comments
from albert.steiner am 03.03.2010
|
| See all my comments
from pstrg am 22.12.2009
|
| See all my comments
BACK
1
2
3
4
Forward
Your rating: 
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
|
Customer ratings:
Average rating, based on 17 ratings |
from mail@veeser-fn.de am 16.04.2010
|
| See all my comments
ordentlich verarbeitet, Zusammenbau Manboard mit Speicher
und Festplatte ohne Probleme,
from xmaestsre am 22.03.2010
|
| See all my comments
With this case you can make your own mini HTPC totaly fanless and totally silent, if you use an adaptor to use Compact Flash as IDE disks
from albert.steiner am 03.03.2010
|
| See all my comments
Super Gehäuse, wenn es noch eine DIN RADIO Schacht Variante gäbe wäre es toll.
from pstrg am 22.12.2009
|
| See all my comments
Perfect mate for the D945GSEJT: very neat and compact; accommodates a 63 mm HD and may be mounted on the back of the display.
Although the board generates low heat, for additional peace of mind the case has a low noise fan whose speed is directly controlled by the board.
A pity that there's no opening for an e-SATA connector, thus making the board's second SATA connector useless.
Sehr gut verarbeitetes Gehäuse. Der Gehäuselüfter klemmte, nach dem lösen der Befestigungsschrauben lief der Lüfter anstandslos. Werde die Gehäuselüfterbefestigung für mein Projekt überarbeiten.
Update from :2010-07-24 06:55
Die Befestigungsschrauben des Gehäuselüfters sind etwas zu lösen, da der Lüfter sonst nicht anläuft.